How To Use A Snatch Block
How To Use A Snatch Block. When you are using a snatch block to gain a mechanical advantage or redirect the winch line, use a shackle to connect the snatch block to the tree saver. Then you have to find another offset anchor point in the opposite direction as the first anchor point.
The winch engine winds a wire rope onto a spool. In order to understand how a snatch block works, imagine a fallen tree blocking a road. Double the pulling capacity of your winch.
Only Use Rated Shackles, The Manufacture Lists The Working Load Limit (Wll) Of The Shackle.
To position the winch line properly inside the snatch block, the top part is rotated, fully exposing the interior pulley. Arguably the most useful use of the snatch block is using a recovery technique called a double line pull. The wire rope passes through the snatch block and then connects to the object you need to lift or pull.
Therefore, The Snatch Block Is Attached To Whatever The Vehicle Is Winching To, And The Winch Line Goes Through The Block On The Pulley And Back To The Vehicle.
The winch engine winds a wire rope onto a spool. Using another tree (one that's still standing) as an anchor point for your snatch block, you can feed a cable from your truck through the snatch block, then fasten it to the fallen tree. A snatch block works like a pulley that, when used in conjunction with a winch, allows you to lift or pull objects of great weight.
To Use A Snatch Block With An Attached Chain And Grab Hook To Maximize Your Towing Strength, Do This:
For difficult recovery operations the snatch block can help you get a better angle for your pull. Reduces amp load and prevents winch overheating. When you are using a snatch block to gain a mechanical advantage or redirect the winch line, use a shackle to connect the snatch block to the tree saver.
In This Video Braden Shows You How To Properly Use A Snatch Block, Tree Saver Along With A 5000Lbs Black Op Series Winch While Out On The Trail.check Out Our.
When a winch drum is fully spooled with cable, it has less power than if it is spooled all the way out due to less line being on the drum, which changes the effective pull ratio. Because the side plate opens, you don’t have to thread your winch cable through the opening, instead you open the side plate, fit the cable over the pulley, and then close the side plate. A snatch block is a pulley block with a side plate that swings open.
Use The Snatch Block In All Recovery Situations To Reduce Winch Motor Heat, Strain And Amp Draw.
For all the car junkies, this one's for you! Then you have to find another offset anchor point in the opposite direction as the first anchor point. When you don’t have that privilege, you can use the snatch block for an angled single line pull.
Post a Comment for "How To Use A Snatch Block"